RCM-ICMEM
Menu
Committees
The 13th AUN/SEED-Net Regional Conference on Materials 2020
(RCM 2020) and 1st International Conference on Materials Engineering and Manufacturing (ICMEM 2020)
Theme: Materials For Sustainability
Honorary Advisory Board
Prof. Ir. Panut Mulyono, M.Eng., D.Eng., IPU, ASEAN Eng.
Rector of Universitas Gadjah Mada, Indonesia
Prof. Emeritus Dr. Ueda Tamon
Chief advisor and Acting Executive Director AUN/SEED-Net, Japan
Ir. Muhammad Waziz Wildan, M.Sc., Ph.D.
Dean of Faculty of Engineering, Universitas Gadjah Mada, Indonesia
Prof. Mochammad Noer Ilman, S.T., M.Sc., Ph.D.
Head of Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Indonesia
Keynote Speakers
Prof. Dr. Ueda Tamon
Shenzen University, China
Prof. Takahira Aoki
Tokyo University, Japan
Prof. Dr. Ahmad Fauzi Mohd Noor
Universiti Sains Malaysia, Malaysia
Assoc. Prof. Pakorn Opaprakasit
Thammasat University, Thailand
Assoc. Prof. Alva Edy Tontowi, PhD.
Universitas Gadjah Mada, Indonesia
Naoto Saito, M.Sc.
Komatsu Ltd., Japan
Assoc. Prof. Dr. Suyitno
(Center for Innovation of Medical Equipment and Devices, Indonesia)
International Advisory Board
Prof. Tomohiro Yokozeki
The University of Tokyo, Japan
Prof. Ryo Higuchi
The University of Tokyo, Japan
Prof. Ir. Jamasri, Ph.D
Universitas Gadjah Mada, Indonesia
Prof. Dr. Ir. Johny Wahyuadi M, DEA.
Universitas Indonesia, Indonesia
Prof. Dr. Ir. Agustinus Purna Irawan, I.P.M.
Rector of Universitas Tarumanagara, Indonesia and Coordinator of Proffesional Certification at BKM-PII
Prof. Gil Nonato C. Santos
De La Salle University Philippines
Prof. Alvin Chua
De La Salle University Philippines
Assoc. Prof. MD. Tawhidul Islam Khan
Saga University, Japan
Scientific Committee
The 13rd RCM and 1st ICMEM 2020 International Conference has a scientific committee which is consist of materials engineering and manufacturing expert from across the Asia and the list of the scientific committee of the 13rd RCM and 1st ICMEM 2020 International Conference is:
Materials Engineering
Prof. Emeritus Dr. Ueda Tamon
Shenzen University, China
Structural Engineering, Concrete Technology, Hybrid Structures
Prof. Dr. Ahmad Fauzi Mohd Noor
Universiti Sains Malaysia, Malaysia
Ceramics, Bioceramics, Advanced Ceramic, Microscopy
Assoc. Prof. Pakorn Opaprakasit
Thammasat University, Thailand
Materials Science and Engineering, Polimer
Prof. Takahira Aoki
The University of Tokyo, Japan
Aerospace Structural Mechanics
Prof. Tomohiro Yokozeki
The University of Tokyo, Japan
Aeronautics and Astronautics
Prof. Ryo Higuchi
The University of Tokyo, Japan
Simulation on Fracture Mechanics.
Prof. Ir. Jamasri, Ph.D
Universitas Gadjah Mada, Indonesia
Composite, Mechanics of Material, Fatigue & fracture
Assoc. Prof. M. Waziz Wildan, M.Sc, Ph.D.
Universitas Gadjah Mada, Indonesia
Ceramics technology, Engineering materials
Prof. M. Noer Ilman, ST, M.Sc, Ph.D
Universitas Gadjah Mada, Indonesia
Mechanics of Materials, Welding, Corrosion, Failure Analysis
Assoc. Prof. Ir. Soekrisno, MSME., PhD.
Universitas Gadjah Mada, Indonesia
Failure Analysis, Fatigue and Fracture, Surface Treatment
Prof. Dr. Ir. Agustinus Purna Irawan, I.P.M.
Rector of Universitas Tarumanagara, Indonesia
Composites, Strength of Materials, Prosthesis, Product Design
Prof. Dr. Ir. Johny Wahyuadi M, DEA.
Universitas Indonesia, Indonesia
Extraction, Corrosion, Material Engineering
Assoc. Prof. Dr. Ir. Viktor Malau, DEA
Universitas Gadjah Mada, Indonesia
Surface Treatment, Corrosion, Engineering materials
Assoc. Prof. Ir. Heru Santoso BR, M.Eng, Ph.D.
Universitas Gadjah Mada, Indonesia
Engineering Material, Polimers, Manufacturing, Robotics
Assoc. Prof. Suyitno, ST, M.Sc. PhD.
Universitas Gadjah Mada, Indonesia
Casting, Biomedical Engineering, and Design
Priyo Tri Iswanto, ST, M.Eng., PhD.
Universitas Gadjah Mada, Indonesia
Failure Analysis, Fatigue and Fracture, Surface Treatment
Dr. Urip Agus Salim, ST., M.Eng.Sc.
Universitas Gadjah Mada, Indonesia
Design, Manufacturing, Polimer, Finite Element
Assoc. Prof. Dr. Kusmono, ST, MT. PhD.
Universitas Gadjah Mada, Indonesia
Metal, Polymer, Nanocomposites
Adhika Widyaparaga, ST., M.Bio.Med., PhD
Universitas Gadjah Mada, Indonesia
Biomedical Engineering
Budi ArIfvianto, ST., M.BioTech. Ph.D
Universitas Gadjah Mada, Indonesia
Biomaterials, Surface Engineering, Powder Metallurgy
Ir. Subagyo, PhD
Universitas Gadjah Mada, Indonesia
Product design, High Temperature Materials Processing
M. Kusumawan Herliansyah, ST, MT., Ph.D
Universitas Gadjah Mada, Indonesia
Material Processing, Biomaterials, and Manufacturing
Prof. Gil Nonato C. Santos
De La Salle University Philippines
Materials Science and Engineering
Manufacturing
Assoc. Prof. MD. Tawhidul Islam Khan
Saga University, Japan
Intelligent mechanics, Mechanical systems
Assoc. Prof. Ir. Alva Edy Tontowi, M.Sc, PhD.
Universitas Gadjah Mada, Indonesia
Rapid Prototyping and Manufacturing
Assoc. Prof. Ir. Rini Dharmastiti, M.Sc, Ph.D.
Universitas Gadjah Mada, Indonesia
Ergonomics, Tribology, Biomedical Engineering
Dr. Ir. Teguh Pudji Purwanto, MT.
Universitas Gadjah Mada, Indonesia
Control System and Mechanical Vibration
R.Rachmat A. Sriwijaya, ST, MT., PhD.
Universitas Gadjah Mada, Indonesia
Mechanical Vibration, Applied Mechanics
Gesang Nugroho, ST, MT., PhD.
Universitas Gadjah Mada, Indonesia
Control and Manufacturing
I Made Miasa, ST, M.Sc., PhD.
Universitas Gadjah Mada, Indonesia
Mechanical Vibration, Applied Mechanics
Indraswari K, ST., M.Sc., PhD.
Universitas Gadjah Mada, Indonesia
Vibrations, Acoustics, Dynamics, Transport Technologies
Muslim Mahardika, ST, M.Eng., Ph.D
Universitas Gadjah Mada, Indonesia
Advanced Manufacturing, Micro Machining, Advanced Metrology Systems
Muhammad Akhsin Muflikhun., S.T.,M.T. PhD.
Universitas Gadjah Mada, Indonesia
Nano-Manufacturing, Manufacturing
M. Arif Wibisono, S.T., M.T., PhD.
Universitas Gadjah Mada, Indonesia
Production Control, Logistics dan Supply Chain Management
Andi Sudiarso, ST, MT, M.Sc.. Ph.D
Universitas Gadjah Mada, Indonesia
Artificial Intelligence, Control and Automation
I G.B. Budi Dharma, ST., M.Eng., Ph.D
Universitas Gadjah Mada, Indonesia
Product Design and Manufacture, Production Engineering
Herianto, ST.,M.Eng., PhD.
Universitas Gadjah Mada, Indonesia
Image processing, Robotics and Automation
Prof. Alvin Chua
De La Salle University Philippines
Mechatronics
Organizing Committee
Chairman
Priyo Tri Iswanto, ST, M.Eng. PhD.
(Universitas Gadjah Mada, Indonesia)
Co-Chairman
Mohammad Rais Alfiansyah Taufiq, S.T., M.Sc.
(Universitas Gadjah Mada, Indonesia)
Organizing Committee
Indro Pranoto, ST, M.Eng., Ph.D.
(Universitas Gadjah Mada, Indonesia)
Cahyo Budi Utomo, S.E.
(Universitas Gadjah Mada, Indonesia)
Rachmadi Norcahyo, S.T., M.T.
(Universitas Gadjah Mada, Indonesia)
Kultira Tangtatswas
(AUN/SEED-NET, Thailand)
Kusmono, ST. MT. PhD.
(Universitas Gadjah Mada, Indonesia)
Muhammad Akhsin Muflikhun., S.T., M.T, Ph.D
(Universitas Gadjah Mada, Indonesia)